Found 86 Products For:

"solid control equipment"

품질 석유 및 가스 시추용 가스 제거 진공 탈기 장치 공장

석유 및 가스 시추용 가스 제거 진공 탈기 장치

ZCQ 시리즈 진공 탈기기는 침입한 가스를 제거하고 침입한 가스를 곧 닦아낼 수 있으며 드릴링 머드 비율을 회수하고 머드 성능을 유지하는 데 중요한 역할을 하는 특수 장비입니다. 동시에 다양한 용도에 적합한 큰 출력의 교반기가 될 수도 있습니다.
품질 고압 펌프 석유 및 가스전 강화 시스템 105MPa 스키드 마운트 통합 장치 공장

고압 펌프 석유 및 가스전 강화 시스템 105MPa 스키드 마운트 통합 장치

The Oil and Gas Field Enhancement System is a comprehensive solution designed to enhance well production, with its core objective being to overcome the extraction challenges of low‑productivity reservoirs. Mainstream technologies fall into two categories: first, reservoir modification, including ...
품질 Carbon Steel Oilfield Mud Desilter Unit With Vibrating Screen 공장 화면

Carbon Steel Oilfield Mud Desilter Unit With Vibrating Screen

진동 스크린과 하이드로사이클론을 갖춘 이 유전 진흙 제거 장치는 굴착 유체에서 미세한 고형물을 제거하여 더 깨끗한 진흙과 더 나은 굴착 효율성을 제공합니다. 견고한 구조와 손쉬운 유지 관리는 장비의 고형물 제어 응용 분야에 적합합니다.
품질 유압 파쇄를 위한 석유 가스전 파쇄 산성화 강화 시스템 유닛 공장

유압 파쇄를 위한 석유 가스전 파쇄 산성화 강화 시스템 유닛

이 유전 및 가스전 강화 시스템은 수압 파쇄, 산성화 및 질소 주입을 통해 유정 생산량을 증대합니다. 스키드, 트레일러 또는 트럭 장착 장치는 육상 및 해상 작업에 대해 6,000 HP로 최대 140 MPa를 제공합니다.
품질 Oilfield Tank Bottom Sludge Treatment Drilling Mud Treatment And Disposal 공장

Oilfield Tank Bottom Sludge Treatment Drilling Mud Treatment And Disposal

The oily sludge treatment system is an environmental protection solution designed for oil‑containing sludge generated in the petroleum industry, such as tank bottom sludge and drilling waste mud. Its core function is to achieve the separation of oil, water, and solids, along with resource recovery. ...
품질 드릴링 유체 진공 탈기기 가스 제거 876rpm - 880rpm 회전 속도 공장

드릴링 유체 진공 탈기기 가스 제거 876rpm - 880rpm 회전 속도

최대 360m³/h의 용량과 ≥95%의 탈기 효율을 갖춘 고효율 진공 탈기기입니다. 벨트 드라이브는 안정적인 장기 작동을 보장합니다. 가연성 가스 환경에 적합하며 석유 및 가스 시추 고체 제어에 이상적입니다.
품질 통합 된 용해 된 공기 플로테이션 클리러미터 퇴적 DAF 시스템 스키드 장착 공장

통합 된 용해 된 공기 플로테이션 클리러미터 퇴적 DAF 시스템 스키드 장착

This compact Integrated DAF Sedimentation Unit is a high-efficiency all-in-one device dedicated to oilfield oily wastewater treatment. Integrating dissolved air flotation and sedimentation techniques, it thoroughly removes suspended solids and oil pollutants; its skid-mounted layout requires minimal ...
품질 55Kw 원심 모래 펌프 15m3/h - 240m3/h 드릴링 유체용 공장

55Kw 원심 모래 펌프 15m3/h - 240m3/h 드릴링 유체용

드릴링 유체 이송을 위한 이 원심 모래 펌프는 내마모성 습식 부품으로 연마성 진흙을 안정적으로 이동합니다. 견고한 설계로 긴 사용 수명과 안정적인 성능을 제공하므로 까다로운 고형물 제어 응용 분야에 적합합니다.
품질 유전 파쇄 유동수 처리 시스템 10 - 500 m3/h 용량 공장

유전 파쇄 유동수 처리 시스템 10 - 500 m3/h 용량

The modular Integrated Oilfield Fracturing Flowback Fluid Treatment System is specially developed to purify highly polluted fracturing flowback fluid. It thoroughly removes suspended solids, oil, grease and chemical residues to meet discharge standards or realize water recycling, helping oilfields ...